Compared to the average trucks, lifted trucks are often higher off the ground. If you have a flat tire, you will need the best floor jack for lifted trucks that can comfortably accommodate the height and lift the truck high enough to replace the wheel.
Unlike the normal jacks, such jacks require an exceptionally long reach, heavy-duty build and a sound structural integrity that can sufficiently bear the weight of your truck.
Main types of jacks for lifted trucks
You already know that not every jack will do for lifted trucks. If you own a lifted truck or planning to, here are the main types of jacks that can help you change your wheel in case of a flat tire:
- Bottle jacks.
- Floor jacks.
- Hi-Lift jacks.
However, there are many brands out there such that getting the best is easier said than done. So that you won’t burn hours on end digging through different reviews websites for a great jack, we have done the dirty job for you. In this review, we have rounded up 3 best floor jack for lifted trucks out there:
3 best floor jack for lifted trucks reviews
Torin Big Red Hydraulic Bottle Jack
Are you a regular off-roader looking for a backup jack that won’t dent your pockets? This is a great heavy-duty jack for your lifted truck especially if you are on a budget.
Unlike most lifted trucks’ friendly jacks you will find out there, the Torin Big Red Hydraulic Bottle Jack is small in size and weighs approximately 15lbs. If you are looking for something that does the job pretty well, is aesthetically pleasing, and a great choice for fitting in tight spots, this jack will do the trick too.
This Torin’s model can lift an immense weight up to 12 tons, an extensive range of 9.06″ to 18.11, making it a great choice for lifting heavy trucks. In fact, there are some models from the same brand that can lift up to 50 tons.
What if the bottom of your truck is higher? That shouldn’t bother you as much. You can simply place a few more inches of height by placing Torin on a raised stable surface or bed. That includes things like a pile of plywood boards or anything stable surface.
The product is water and dirt resistant and would need minimum resistance. Torin Big Red Hydraulic Bottle Jack is designed for both non-commercial and commercial usage. The base is rugged and wide while the top screw is highly adjustable to grant your jack more versatility. That way, it makes the job a lot easier for you.
Thanks to the heavy-build steel construction, the jack is durable and quite strong and can work comfortably at a varied range of temperatures. Besides, the model is lubed by high-quality oil that reduces chances of damage or corrosion so that your jack will not only work efficiently but also serve you a little longer.
Strengths
- Lightweight
- Durable premium steel construction
- Good working capacity
- Optimized for heavy-duty lifting.
Limitations
- Sometimes the jack might not lower itself when the pressure is relieved.
- The paint comes off with time.
Powerbuilt 620471 Unijack
Unlike Torin, this model is designed to work perfectly in all-terrain. The jack is high capacity and is built to handle any minor situation that might arise with your lifted truck. Thanks to the triangular frame design, the jack is extremely stable and a great fit for heavy lifting.
Why are we including it in our list of best floor jack for lifted trucks? Firstly, the jack packs amazing features that allow you to jack vertically resulting in greater extension. Some of its top features include:
- 21 –inch lifting height
- Build-in jack stand
- Heavy-duty triangular metallic built.
Unlike the Turin’s 18 inch lift height, this model can lift your truck up to 21 inches. The hydraulic bottle, on the other hand, allows you to lift up to 3 tons so it can support heavier trucks.
What we liked more about this jack is that it can work great even if your vehicle has a unibody chassis. Such trucks have few ‘anchoring points’ making it hard for use by most jacks. Thankfully, Unijack easily secures a place to help you lift the track to your desired height.
What’s more? The jack isn’t bulky, you can easily store it once you are done. The frame design not only makes it easier to carry around but also means it’s not going to budge or sink no-matter where you are going to use it.
If you have a home garage, this tool is perfect for you. It is also great for you if you are tired using a hydraulic gas gasket that was probably installed by a tired and depressed garage worker.
But if you want a tool that has a perfect jerk stand, this is the all-in-one unit that combines hydraulic lift with a jack.
Strength
- 21 inches of lifting capacity
- Added protection of a built-in jack stand
- More durable triangular metallic built
Limitations
- Slow pump action of a bottle jack
Hi-Lift Jack HL484 48″ Jack for Lifted Trucks
The jack is known for quality design and durability, Hi-Lift Jack HL484 48″ Jack is one of the few stand-alone jacks out there that can help raise even the tallest of lifted trucks.
If you are looking for a one-size-fits-all jack designed to lift high and heavy trucks, this one is a good choice.
The jack features a sturdy, straight-forward structure that makes it great for lifting heavy trucks up to 48 inches.
The jack can bear up to 7000 lbs. However, you can only use it to lift a tire for only one corner of the track at a time. You cannot use it to lift the entire back end or front.
What makes this jack impressive is the attachments and the optional accessories that are designed to make it easier to perform repairs.
On top of its all-terrain capabilities, the jack is easy to maintain, clean, store and dissemble, making it only good for performing heavy-duty jobs but also an above-average jack.
Notice that this is an exterior jack. So make sure you are following all the precautionary safety steps like ensuring all the tired are blocked. If you own a Jeep or tractor, you must be familiar with trailer jacks. The Hi-Fi jacks work in the same way. They have been very useful to the off-roading community, especially when they are trying to get their vehicles unstuck.
While the model is quite powerful, the vertical bar is very close to the body of the vehicle. However, most modern vehicles have an all of the rounded, aerodynamic body styles.
As a result, it becomes difficult to jack up such trucks without having to scrape the side of the truck’s body.
That means you will want to lift your truck from the bumpers. If your bumpers are simply decorative and not designed to support your truck, chances are this kind of jack won’t be of good help.
Overall, this is an extremely powerful and versatile jack. It is an ideal choice for anyone who owns lifted trucks or off-roading.
You can even use it along with chains as a winch to pull out other vehicles onto a trailer or out of mud.
Strengths
- Highly durable.
- One-size-fits-all jack.
- Offers higher lifting capacity – 48 inches.
- Accessories and attachments that make it easier to repair.
Limitations
- Only lifts from sides, can’t lift from underneath.
If you own a lifted truck, you need to purchase a jack that will help you lift it up high enough to allow you to change a wheel.
We have reviewed the best floor jack for lifted trucks that might be of good help to you. If you are financially constrained but need a great jack for your lifted truck, Torin Big Red Hydraulic Bottle Jack will be a great choice.
If your lifted truck sports a unibody chassis, Powerbuilt 620471 Unijack will be a good fit. If you are sworn off-roader and own a Jeep or tractor, Hi-Lift Jack HL484 48″ will be of great help.
We hope this review will help you get the jack you are looking for.